Users Manual

How to wear A Helmet and check if it’s fit

1.    Select a Helmet closest to your Head size.

2.   Expand the Helmet by pulling the chin straps and slide your head    in.

3.    Once worn, make sure the inner lining fits snugly over your head.

4.   The top pad should touch the top of your head and cheek pads      should touch your cheeks.

5.  Now, try rotating the Helmet without moving your head. If the    helmet moves easily, get a smaller size.

6.  Fasten the chin strap tightly and try to move the Helmet in a  forward and backward motion. If the helmet comes off in either  direction, it’s too large.

7. To remove the Helmet, open the chin straps spread it and lift it  backward direction & rest it on the neck then remove it.

Precautions on Inadvertent Damage to Helmets

1. Do not “park” Helmet on mirror stalks or sissy bar to avoid damage     to liner.

2. Do not carry Helmets on the motorcycle‘s lock while riding to avoid     exhaust pipe burns, tire abrasion, and strap damage.

3. Keep Helmet out of the reach of pet to avoid interior being chewed       like a shoe, or scratched like sofa, as all too often happens. Such       damage can be irreparable.

4. Do not expose Helmet to solvents including gasoline, or their fumes     to avoid damage to shields, small plastic components and interior.  

How to clean Helmet Interior

1. Remove Cheek pads and lining by gently pulling out. They are held       by Velcro or push-buttons, so just pull out.

2. Put removed Cheek pads and linings into a washing bag with              detergent and wash them on the “gentle” or “hand-wash setting”.

3. After washing the liner and cheek pads, you can hang them out to       dry.  Do not apply heat because it can cause them to shrink and           then they will no longer fit the Helmet.

4. Fix the dry Cheek pads and liner properly & use your Helmet               regularly.

5.Note: this is only for  Helmet with removable interior